OpenVox DGW-1004 Скачать руководство пользователя

Страница: 28 / 56

Match

Auth

Username

If available, match user entry using the 'username' field from the

authentication line instead of the 'from' field.

Realm

Realm for digest authentication. Realms MUST be globally unique according to RFC 3261. Set this to your host name or domain

name.

Use

Domain

as Realm

Use the domain from the SIP Domains setting as the realm. In this case, the realm will be based on the request 'to' or 'from'

header and should match one of the domain. Otherwise, the configured 'realm' value will be used.

Always

Auth

Reject

When an incoming INVITE or REGISTER is to be rejected, for any reason, always reject with an identical response equivalent

to valid username and invalid password/hash instead of letting the requester know whether there was a matching user or peer

for their request. This reduces the ability of an attacker to scan for valid SIP usernames. This option is set to 'yes' by default.

Authenticate

Options

Requests

Enabling this option will authenticate OPTIONS requests just like INVITE requests are. By default this option is disabled.

Allow Guest

Calling

Allow or reject guest calls (default is yes, to allow). If your gateway is connected to the Internet and you allow guest calls, you

want to check which services you offer everyone out there, by enabling them in the default context.

Media

Table 4-2-6 Instruction of Media

Options

Definition

TOS for SIP Packets

Sets type of service for SIP packets

TOS for RTP Packets

Sets type of service for RTP packets

Codec Settings

Select codecs from the list below.

Содержание DGW-1004

























































Результаты поиска

Содержание DGW-1004

Отзывы:

Похожие инструкции для DGW-1004

Бренды по названию

Популярные бренды

OpenVox DGW-1004, Руководство пользователя

Результаты поиска

Содержание DGW-1004

Отзывы:

Похожие инструкции для DGW-1004

Бренды по названию

Популярные бренды