Cloud Synced Attributes: once you log in to opensprinkler.com in the UI/app
(through sidebar menu), cloud-synced attributes will become available, including
station photos and notes. You can take a custom photo for each station by using
the OpenSprinkler mobile app.
4. Menu Buttons
The menu button is on the bottom right corner of all pages and allows quick navigation
between pages relevant to the controller. This menu has the following options:
●
Preview Programs, or use keyboard shortcut ALT+V
●
View Logs, or ALT+L
●
Change Rain Delay, or ALT+D
●
Run-Once program, or ALT+R
●
Edit Programs, or ALT+P
●
Edit Options, or ALT+O
●
Stop All Stations (Section 4.2).
Additionally, when you are at the home page, the menu has a button labeled Show
Disabled, which allows disabled zones (if any) to show up in the zone list.
TIP:
at any time, you can activate the menu by pressing the M key on your keyboard.
4.1 Rain Delay
To manually trigger a rain delay time, click on the menu button, and select Change Rain Delay to set a custom rain delay time
(in hours). Any zone affected by rain delay will immediately stop, and will not run until the rain delay time is over. To cancel an
existing rain delay, simply set 0 as rain delay time.
4.2 Stop All Zones or an Individual Zone
Click Stop All Stations to stop all zones immediately, including those in the queue waiting to run. To stop an individual zone
(either running or in the queue waiting to run), tap/click the station card on the homepage, and select Yes to confirm.
5. Edit Options
At the home page, click Edit Options (or use keyboard shortcut ALT+O) to configure the basic settings.
OpenSprinkler Firmware 2.1.9 User Manual
10
