Opengear 9913DA-AES110-RG, Руководство пользователя

Страница: 21 / 41

9913DA-AES110-RG User Manual Installation •
• •
• 2-5
Cabling for the 9913DA-AES110-RG
This section provides information for connecting cables to the installed Rear Modules. Connect the
input and output cables according to the following sections. The inputs are internally terminated in
110ohm. It is not necessary to terminate unused outputs.
Cabling Overview
The 9913DA-AES110-RG is used with the following Rear Modules:
• RM20-9913DA110-B Full Rear Module — Each module occupies two slots and
accommodates one card. This rear module provides one AES input and eight AES
outputs. (
Figure 2.2 )
• RM20-9913DA110-B/S Split Rear Module — Each module occupies two slots and
accommodates two cards. This rear module provides one AES input and four AES
outputs per card. (
Figure 2.3 )
Figure 2.2 Cable Connections for RM20-9913DA110-B
Full Rear Modules
Figure 2.2 Cable Connections for RM20-9913DA110-
B/S Split Rear Modules