OpenEye OE-RWSR2, Руководство пользователя

Страница: 60 / 67

Configuring the Alarm Monitor
1. Click Menu , and then click Settings.
2. Click Alarm Monitor .
3. Select Use to enable the Alarm Monitor.
Note
The Alarm Monitor uses one port to transfer the data (the Emergency Port). The port can be
adjusted inside the Network settings if necessary. It is recommended that the default setting
should be used unless the port must be changed.
4. Click Save and Close .
Configure your Recorder
For the Alarm Monitor to work, you must have configured your recorder to transmit alarm information to
RADIUS. To access your recorder’s configuration settings using RADIUS, right-click the recorder in the
Server List, and then click
Device Configuration .
Professional Recorder
For a Professional Recorder, follow these steps:
1. Click Recording Schedule .
2. Select the appropriate Alarm Option .
3. Set your desired Transmission Duration .
4. Type the IP Address of your RADIUS workstation in the
Emergency IP list.
5. To enable an IP address, select Use .
Tip
The RADIUS Alarm Monitor displays only events
set up as
Emergency Alarms .
6. Click Apply .
E-Series Recorder
For an E-Series Recorder, follow these steps:
1. Click Record , an d then click Motion / Event Setup .
2. Click Alarm Monitor .
3. Set Send to Alarm Monitor to On .
4. Click Save.
60 32541AB