OpenEye CM-510, Руководство по установке, Страница: 4 / 37

iv 28582AA
Important Safeguards
1.
Read Instructions
Read all of the safety and operating instructions before using the product.
2.
Retain Instructions
Save these instructions for future reference.
3.
Attachments / Accessories
Do not use attachments or accessories unless recommended by the appliance manufacturer as they may cause hazards, damage
product and void warranty.
4.
Installation
Do not place or mount this product in or on an unstable or improperly supported location. Improperly installed product may fall, causing
serious injury to a child or adult, and damage to the product. Use only with a mounting device recommended by the manufacturer, or
sold with the product. To insure proper mounting, follow the manufacturer's instructions and use only mounting accessories
recommended by manufacturer.
5.
Power source
This product should be operated only from the type of power source indicated on the marking label.
Precautions
‰ Operating
z Before using, make sure power supply and others are properly connected.
z While operating, if any abnormal condition or malfunction is observed, stop using the camera immediately and then
contact your local dealer.
‰ Handling
z Do not disassemble or tamper with parts inside the camera.
z Do not drop or subject the camera to shock and vibration as this can damage camera.
z Do not block the cooling holes on the bracket. This camera has a cooling fan inside the housing. Blocking the cooling
holes will cause heat to build up and cause malfunction.
z Care must be taken when you clean the clear dome cover. Scratches and dust will ruin the image quality of your camera.
Do not use strong or abrasive detergents when cleaning the camera body. Use a dry cloth to clean the camera when it is
dirty. In case the dirt is hard to remove, use a mild detergent and wipe the camera gently.
‰ Installation and Storage
z Do not install the camera in areas of extreme temperatures in excess of the allowable range. (-50°C ~50°C / -58°F ~
122°F)
z Avoid installing in humid or dusty places. The relative humidity must be below 90%.
z Avoid installing in places where radiation is present.
z Avoid installing in places where there are strong magnetic fields and electric signals.
z Avoid installing in places where the camera would be subject to strong vibrations.
z Never face the camera toward the sun. Do not aim at bright objects. Whether the camera is in use or not, never aim it at
the sun or other extremely bright objects. Otherwise the camera may be smeared and damaged.