OpenEye CM-510, Руководство по установке, Страница: 17 / 37

28582AA 7
Dome ID Setting
Use the switch to change your speed dome ID by turning the arrow to the desired number. For instance, if the dome ID is 123, the ID
switch should be set as below.
Centesimal Digit Decimal Digit Single Digit
NOTE : No two domes should have the same ID, or communication conflict may occur
NOTE: The number 0 should be at the top, as shown, when setting the camera ID.
Dome Control Protocol Setting
Define the protocol you are going to use based on the devices of your surveillance system. Generally, use one protocol even if the
devices are provided by different manufacturers. Use the switch to set your dome control protocol and the baud rate. Refer to the
table below and turn the arrow to choose a protocol for your speed dome.
Switch No. Protocol Baud Rate
00 VCL 9600
01 Pelco D 2400
02 Pelco P 4800
04 Chiper 9600
05 Philips 9600
07 OPTIX 3 9600
08 AD422 4800
09 DM P 9600
11 Pelco D 4800
12 Pelco D 9600
13 Pelco P 2400
14 Pelco P 9600
15
JVC 9600
21 Kalatel-485 9600
22 Kalatel-422 4800
EXAMPLE: To set the protocol Pelco D, with switch no. 1 and baud rate 2400, the protocol
switch should be set as at right.
NOTE: The number 0 should be at the top, as shown, when setting the camera ID.