7
Owner’s guide
Rev. 1.3
5.
Connecting the system
The two speaker boxes are connected using the supplied speaker link cable. The speaker link cable
is an ordinary stereo cable with RCA plugs in both ends, so it doesn’t matter which end of the
cable you connect to which speaker box. To ensure polarity you need to mount the plugs correctly
however; so that the connectors marked “B” are connected, and the connectors marked “G” are
connected.
Then connect the source needed. Three options are available: analog, digital optical and digital
coax. If you use analog input, then digital optical and coax are disabled. If you use digital optical
and signal is detected, digital coax is disabled. See “1 Controls and connectors” for description of
the individual input connector.
Mains power may only be connected after the speaker link cable has been installed. The mains
power connected is placed on the back of the right side speaker. There is no mains switch. All daily
use is operated through the buttons on the front panel or by using a remote control.
