10
Owner’s guide
Rev. 1.3
7.6 Audio profiles
The Opalum Furniture Sound System is built for use in BoConcept furniture’s, for instance a
cabinet or in a bookshelf. Some cabinets have cloth cabinet doors, some doesn’t. To give the
optimum, the system has been equipped with profiles to match these different usages. To select
the right profile do the following:
1.
Make sure the system is ON
2.
Now press and hold the Standby button for more than 2 seconds
3.
The LED now flashes white
4.
Now press the either VOL+ or VOL-
a.
VOL+ if the speakers are placed behind cloth cabinet doors
b.
VOL- if the speakers are NOT placed behind cloth cabinet doors
5.
The profile has been set when LED turns green
6.
The system returns to normal operation and LED turns white
7.7 Factory reset
The factory reset function is to bring the unit back to the initial settings set by the factory. All
learned IR commands are erased. Profile for placement below TV will be selected. Master volume
will be set to 60%.
The reset function is activated by:
1.
Make sure the unit is ON
2.
Now press and hold the Standby button for more than 2 seconds
3.
The LED now flashes white.
4.
Now press the BT pair button for more than 5 seconds. When Factory reset is performed
the LED starts flashing red.
5.
Reset has been completed when the control hub reboots (LED turns OFF and then ON
white).
