Pair & Connect -- Step 1
Page 8
- Make sure your OontZ Angle 3 PLUS battery has a sufficient charge, it is not able to connect when the charge is too low
- Your audio source device needs to be within 33 unobstructed feet of the OontZ Angle 3 PLUS
Turn ON your OontZ Angle 3 PLUS
The Blue Light will turn on.
If the Blue Light is flashing
the OontZ Angle 3 PLUS is ready to pair and connect.
If the Blue Light is solid
the OontZ Angle 3 PLUS has automatically reconnected to the
last audio source device the speaker was connected to and is ready to play.
Note: The OontZ Angle 3 PLUS will automatically try to connect to the last audio source device it was connected
to each time it is turned on and that audio source device is within range.
The OontZ Angle 3 PLUS can be connected to one audio source device at a time.
To pair and connect to a different audio source device, you need to first disconnect the
currently paired audio source device. To disconnect it, press and hold down the
Bluetooth
button
for 2 seconds. The
Blue Light
will begin
flashing
and the OontZ Angle 3 PLUS is ready
to pair and connect.