Playing From Non-Bluetooth Audio Source Devices
Using the 3.5mm Audio Cable
- Make sure your OontZ Angle 3 PLUS
battery has a sufficient charge
Note: The Bluetooth on the OontZ Angle 3 PLUS is disabled when the 3.5mm audio cable is connected to the speaker.
You need to remove the 3.5mm audio cable from the speaker in order to connect to a Bluetooth audio source device.
Page 12
Plug one end of the included 3.5mm
audio cable into the
AUX IN Jack
on
the back of your speaker.
Plug the other end of the 3.5mm
audio cable into the headphone jack
on your non-Bluetooth audio device.
You are now ready to play.