4
5
tighten with
suitable wrenches
until tight
Ooni Pro Gas
Burner FSD
Parts required:
Tools required:
Ooni Pro Gas-
Burner FSD
Hose pipe
Wrench x2
Install hose pipe
•
This appliance shall only be used in an above ground open-air situation with natural
ventilation, without stagnant areas, where gas leakage and products of combustion are
rapidly dispersed by wind and natural convection.
•
Any enclosure in which the appliance is used shall comply with one of the following:
An enclosure with walls on all sides, but at least one permanent opening at ground level
and no overhead cover.
Within a partial enclosure that includes an overhead cover and no more than two walls.
Within a partial enclosure that includes an overhead cover and more than two walls, the
following shall apply:
(i) at least 25% of the total wall area is completely open; and
(ii) at least 30% of the remaining wall area is open and unrestricted.
In the case of balconies, at least 20% of the total of the side, back and front wall areas
shall be and remain open and unrestricted.
• Outdoor Area - Example 1
• Outdoor Area - Example 2
Diagrammatical Representation of Outdoor Areas
USA / CAN
