12
13
c.
Take the back cover and align
the screw holes over the pencil
marks (or the wall anchors).
Place the screws through these
gaps and tighten.
d.
Once the back cover is secure,
place the Ooma Keypad onto it.
Secure the Ooma Keypad into
place by screwing the back
cover screw.
How to Check Your Current Mode
11
After pairing your Ooma Keypad with your Ooma Telo base station, you
can check what mode your system is in by simply pressing any number key
on the Ooma Keypad. After a short delay, the key for the current mode will
light up. Note that if your system is in another mode that isn’t on the Ooma
Keypad, such as Vacation mode, none of the keys will light up.
How to Switch Modes
12
You can switch modes by simply entering your PIN code, followed by the
mode you want to switch to. If the PIN code you entered is valid, the Ooma
Keypad will play a long beep and will display a solid
green
light. Otherwise,
the Ooma Keypad will blink
red
and play three short beeps if the PIN is invalid.
Содержание Smart Security Keypad
Страница 1: ...Keypad Quick Start Guide...