OnTruss Prinz Gewerbepark - Halle 78 Bozener Str. 1 86165 Augsburg / GERMANY
19 von 27
STEP 4
Your counter is almost ready. Finally, you just have to mount the two corners C90A as end plate. This
procedure differs slightly from step 2, viz. in the initial situation of the BoardBinder
One BoardBinder remains in the short rail of the corner. Remove the other BoardBinder and insert it
completely into the rail of the straight board. Additionally, there must be 2 GripSlats in the groove.
Attach the end piece C90A to the end of the straight board and slide the two BoardBinders. They lock into
the straight board and the end piece C90A.
This is the position of both BoardBinders when the end piece C90A is connected safely.
Finally, fasten the end piece C90A on the truss using the Velcro tapes.
