OnTruss Prinz Gewerbepark - Halle 78 Bozener Str. 1 86165 Augsburg / GERMANY
15 von 27
You can place the TrussClips anywhere you want. The marking system between the two main rails helps
you to avoid colliding with the bracing when you put the board on later.
To do this, take the first board in your hand and place it lengthwise upright on your truss.
Now you have to check where the TrussClips have to be placed best, in order to prevent them from colliding
with the bracing. You should decide on either a position on or between the marking points.
This position is valid for all TrussClips on this board.
In most cases you can also use the same position for all following boards. This will save you a lot of time.
Please check when you put on the next board that the TrussClips really fits. If you have placed truss
segments in your substructure, it is quite possible that you have to move a few TrussClips again.
