OnTruss Prinz Gewerbepark - Halle 78 Bozener Str. 1 86165 Augsburg / GERMANY
18 von 27
STEP 3
Now you can continue with the installation of the straight boards.
Always use 2 GripSlats at each joint. Insert the GripSlats into the groove of a board. You can either insert
them into the board that is already mounted on the truss or you can insert them into the new one.
Mounting the GripSlats is very important. It gives the assembly extra stability and ensures a
clean plate to plate transition.
To mount a new board, place it in an angle of 10-20° on the already mounted board and insert the protruding
GripSlats into the groove. Then snap in the board onto the truss.
This is the way you proceed with all straight boards. Make sure that the transition between each plate is
flush at the end of your work. Ensure that there is no gap between the boards.
