OnTruss Prinz Gewerbepark - Halle 78 Bozener Str. 1 86165 Augsburg / GERMANY
16 von 27
10.
Mounting the EventBoards on trusses
STEP 1
If possible, you should always start placing the boards at an outer corner. You press both boards from
above onto the truss. Then align the boards until the 45° junction fits perfectly. To do this you can still
move the boards quite easily on the truss.
If you cannot apply the boards correctly, maybe a TrussClip will collide with a bracing or an
end plate of a truss. Please check this and relocate the TrussClip.
STEP 2
Next attach the corner piece C90A. You have to insert 2 GripSlats in each groove. You can attach them to
the two straight boards or the corner C90A. Please check that both BoardBinders (#2) are inserted in the
rails at the corner piece. They must be in the rest position.
The BoardBinders and GripSlats are available as separate accessories.
