Onkyo TX-SR604 Скачать руководство пользователя страница 47

Страница: 47 / 92

First Time Setup

—Continued

If you connect an

-capable Onkyo MiniDisc

recorder, CD recorder, or next generation HDD-compat-
ible component to the TAPE IN/OUT or VIDEO 3 IN
jacks, for

to work properly, you must change this

setting.

This setting can only be changed on the AV receiver.

iPod photo:

If you’re using an iPod photo with the

DS-A1 Remote Interactive Dock, connect the DS-A1 to
the VIDEO 3 IN jacks.

Note:

HDD can be selected for the TAPE input selector or
VIDEO 3 input selector, but not both at the same time.

If the impedance of any speaker is 4 ohms or more but
less than 6, set the minimum speaker impedance to 4
ohms.

Note:

Before you change this setting, turn down the volume.

Note:

This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.

Changing the Input Display

Press the [TAPE] or [VIDEO 3]
input selector button so that
“TAPE” or “VIDEO 3” appears on
the display.

Press and hold down the [TAPE]
or [VIDEO 3] input selector but-
ton (about 3 seconds) to change
the setting.

Repeat this step to select MD, CDR, or
HDD.
For the TAPE input selector, the setting
changes in this order:

TAPE

→

CDR

→

HDD

For the VIDEO 3 input selector, the set-
ting changes in this order:

VIDEO 3

↔

HDD

1, 2

TAPE

VIDEO

TAPE

VIDEO

→

Minimum Speaker Impedance (not
North American models)

Press the [RECEIVER] button,
followed by the [SETUP] button.

The main menu appears onscreen.

Use the Up and Down [

]/[

]

buttons to select “8. Hardware
Setup,” and then press [ENTER].

The Hardware Setup menu appears.

Use the Up and Down [

]/[

]

buttons to select “SP Imped-
ance,” and then use the Left and
Right [

]/[

] buttons to select:

4 ohms:

Select if the impedance of any
speaker is 4 ohms or more but
less than 6.

6 ohms:

Select if the impedances of all
speakers are between 6 and
16 ohms.

Press the [SETUP] button.

Setup closes.

If you change this setting, you must run the automatic
speaker setup again (see page 38).

RECEIVER

SETUP

8.Hardware Setup
------------------------
a.SP Impedance :6ohms
b.PoweredZone2:NotAct
c.TV Format :Auto
d.AM Freq. Step: 9kHz
e.Remote ID :1
f.HDMI Audio Out :Off
g.SW Input Sensitivity
: 0dB

SETUP

Содержание TX-SR604





























































































Результаты поиска

Содержание TX-SR604

Отзывы:

Похожие инструкции для TX-SR604

Бренды по названию

Популярные бренды

Onkyo TX-SR604, Инструкция по эксплуатации

Результаты поиска

Содержание TX-SR604

Отзывы:

Похожие инструкции для TX-SR604

Бренды по названию

Популярные бренды