Onkyo TX-SR604 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 92

background image

31

Connecting the AV Receiver

—Continued

About HDMI

Designed to meet the demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface
standard for connecting TVs, projectors, DVD players, set-top boxes, and other video components. Until now, several
separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry
control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichannel digital audio, and
multichannel PCM).
The HDMI video stream (i.e., video signal) is compatible with DVI (Digital Visual Interface)

*1

, so TVs and displays

with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (This may not work with some TVs and
displays, resulting in no picture.)
The AV receiver uses HDCP (High-bandwidth Digital Content Protection), so only HDCP-compatible components can
display the picture.

Supported Audio Formats

• 2-channel linear PCM (32–192 kHz, 16/20/24 bit)

• Multichannel linear PCM (5.1 ch, 32–96 kHz, 16/20/24 bit)

• Bitstream (Dolby Digital, DTS)

Your DVD player must also support HDMI output of the above audio formats.

About Copyright Protection

The AV receiver supports HDCP (High-bandwidth Digital Content Protection)

*2

, a copy-protection system for digital

video signals. Other devices connected to the AV receiver via HDMI must also support HDCP.
Commercially available HDMI cables (supplied with some components) should be used to connect the AV receiver’s
HDMI OUT to the HDMI input on your TV or projector.

*1 DVI (Digital Visual Interface): The digital display interface standard set by the DDWG

*3

in 1999.

*2 HDCP (High-bandwidth Digital Content Protection): The video encryption technology developed by Intel for HDMI/DVI. It’s designed to

protect video content and requires a HDCP-compatible device to display the encrypted video.

*3 DDWG (Digital Display Working Group): Lead by Intel, Compaq, Fujitsu, Hewlett Packard, IBM, NEC, and Silicon Image, this open

industry group’s objective is to address the industry's requirements for a digital connectivity specification for high-performance PCs and
digital displays.

Connecting Components with HDMI

The AV receiver’s HDMI interface is based on the following standard:
High-Definition Multimedia Interface Specification Informational Version 1.1

«
...
29
30
31
32
33
...
»

Содержание TX-SR604





























































































Отзывы:

Нет отзывов

Похожие инструкции для TX-SR604

Бренд: Panasonic Страницы: 52

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 2

SAHT730 - DVD THEATER RECEIVER

Бренд: Panasonic Страницы: 23

Бренд: Panasonic Страницы: 88

Бренд: Samsung Страницы: 36

Бренд: YORKVILLE Страницы: 79

Бренд: S&P Страницы: 72

Бренд: Fireside Audiobox Страницы: 12

The One MP-TO-01-C

Бренд: Meet PAT Страницы: 14

Бренд: Gemini Страницы: 7

Бренд: Salda Страницы: 28

Бренд: Insignia Страницы: 2

Бренд: Teac Страницы: 23

Бренд: Soyntec Страницы: 5

Бренд: Philips Страницы: 16

Бренд: Philips Страницы: 76

Бренд: Sharp Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды