Onkyo TX-SR604 Скачать руководство пользователя страница 39

Страница: 39 / 92

First Time Setup

—Continued

Put the speaker setup micro-
phone at measurement point

Notes:

• Make sure the microphone is hori-

zontal.

• If there’s an obstacle between the

microphone and any speaker, the
automatic setup will not work cor-
rectly. Set up the room as you would
when enjoying a DVD.

• Positioning the microphone close to

where your ears would normally be
will provide better results. You can
adjust the height of the microphone
by using a tripod or level table.

• It takes about 10 minutes to complete

the automatic speaker setup.

Connect the setup microphone
to the SETUP MIC jack.

Notes:

• If the AV receiver was previously

muted, it will be unmuted.

• Automatic speaker setup cannot be

performed while a pair of head-
phones is connected.

Press [ENTER].

The automatic speaker setup starts.

A test tone is output by each speaker in
turn, as the Audyssey2EQ function
determines which speakers are con-
nected. This takes a few minutes.

Note:

If any extraneous noise is picked up by
the microphone, the automatic setup
may not work correctly, so don’t make
any noise.

Auto Speaker Setup
========================
Please place microphone
at center of listening
area at ear height.

Push Enter:Next

Auto Speaker Setup
========================
Do not unplug Setup Mic.

Please, keep quiet.

Now measuring...

The speaker detect results
appear.

“Yes” means that the speaker was
detected. “No” means that no speaker
was detected.

If you agree with the results, use
the Up and Down [

]/[

] but-

tons to select Next, and then
press [ENTER].

The options are:

Next

Proceed to the next step.

Retry

Return to step 2 and try again.

Cancel

Cancel the automatic speaker setup.

Auto Speaker Setup
========================
----SP Detect Result----
FL:Yes FR:Yes
SL:Yes SR:Yes
SBL:Yes SBR:Yes
C:No SW:Yes
------------------------
Next
Retry
Cancel

Содержание TX-SR604





























































































Результаты поиска

Содержание TX-SR604

Отзывы:

Похожие инструкции для TX-SR604

Бренды по названию

Популярные бренды

Onkyo TX-SR604, Инструкция по эксплуатации

Результаты поиска

Содержание TX-SR604

Отзывы:

Похожие инструкции для TX-SR604

Бренды по названию

Популярные бренды