
En-
38
Troubleshooting
—Continued
Can’t access the music files on a USB device
• Make sure the USB device is plugged in properly.
• The tuner supports USB devices that support the USB
mass storage device class. However, playback may
not be possible with some USB devices even if they
conform to the USB mass storage device class.
• USB memory devices with security functions cannot
be played.
Standby Power Consumption
• In the following cases, the power consumption may
reach up to a maximum of 24 W:
1. “Wake Up On AirPlay” under the “AirPlay”
setting is set to “On.”
2. “Network Control” is set to “Enable” in the
“Network Setup” setting.
USB Device Playback
Others
The tuner contains a microcomputer for signal
processing and control functions. In very rare
situations, severe interference, noise from an external
source, or static electricity may cause it to lockup. In
the unlikely event that this happens, unplug the power
cord from the wall outlet, wait at least five seconds,
and then plug it back in again.
Onkyo is not responsible for damages (such as CD
rental fees) due to unsuccessful recordings caused by
the unit’s malfunction. Before you record important
data, make sure that the material will be recorded
correctly.
Before disconnecting the power cord from the wall
outlet, set the tuner to Standby.