En-
25
Using the USB/Network Device
—Continued
• Press [RETURN] to return to the previous menu.
This section explains how to play music files from a
USB device (e.g., USB flash drives and MP3 players).
See also: “Network/USB Features” (
page 29).
1
Press [USB] button to select the “USB”
input.
You can also select the USB input by pressing the
tuner’s [INPUT] button.
2
Plug your USB device into the tuner’s USB
port.
The USB appears in the display. It will flash if the
tuner cannot read the USB device.
3
Press [ENTER].
A list of the device’s contents appears. To open a
folder, use [
]/[
] to select it, and then press
[ENTER].
4
Use [
]/[
] to select a music file, and press
[ENTER] or [
/
] to start playback.
• To stop or pause playback, press [
/
],
respectively.
• To select the next song, press [
]. To select
the beginning of the current song, press [
].
To select the previous song, press [
] twice.
• To fast forward the current song, hold down [
].
To fast reverse the current song, hold down [
].
• To switch the repeat mode, press [REPEAT].
To switch the random mode, press [SHUFFL].
• To switch displays, press the [DISPLAY] button.
Press the button repeatedly to display in turn
strings of information for the currently-playing
song (such as, artist name, album title, playback
elapsed time, song duration, etc.).
• Press and hold down the tuner’s [MENU] button
to return to the first menu.
Notes:
• If the media you connect is not supported, the message
“No Storage” will appear on the display.
• If you connect a USB hard disk drive to the tuner’s
USB port, we recommend that you use its AC adapter
to power it.
• The tuner supports USB MP3 players that support the
USB Mass Storage Class standard, which allows USB
devices to be connected to computers without the need
for special drivers or software. Note that not all USB
MP3 players support the USB Mass Storage Class
standard. Refer to your USB MP3 player’s instruction
manual for details.
• Protected WMA music files on an MP3 player cannot
be played.
• Onkyo accepts no responsibility whatsoever for the
loss or damage to data stored on a USB device when
that device is used with the tuner. We recommend that
you back up your important music files beforehand.
• MP3 players containing music files that are managed
with special music software are not supported.
• Operation is not guaranteed for all USB devices,
which includes the ability to power them.
• Do not connect your USB device via a USB hub. The
USB device must be connected directly to the tuner’s
USB port.
• If the USB device contains a lot of data, the tuner
make take a while to read it.
• USB devices with security functions cannot be
played.
• Do not disconnect the USB device or USB cable that
comes with iPod/iPhone to the USB port at the front
of the tuner, while the message “Connecting...”
appears on the display.
Playing the USB Device
,
,
,
,