52
En
Audio Selector
You can set priorities of audio output when there are both
digital and analog inputs.
■
Audio Selector
`
ARC
:
The audio signal from your TV tuner can be sent to
the
HDMI OUT
of the AV receiver.
*1
With this selection the TV’s audio can be automati-
cally selected as a priority among other assignments.
`
HDMI
:
This can be selected when
HDMI IN
has been
assigned as an input source. If both HDMI (
HDMI
IN
) and digital audio inputs (
COAXIAL IN
or
OPTI-
CAL IN
) have been assigned, HDMI input is auto-
matically selected as a priority.
`
COAX
:
This can be selected when
COAXIAL IN
has been
assigned as an input source. If both coaxial and
HDMI inputs have been assigned, coaxial input is
automatically selected as a priority.
`
OPT
:
This can be selected when
OPTICAL IN
has been
assigned as an input source. If both optical and
HDMI inputs have been assigned, optical input is
automatically selected as a priority.
`
Analog
:
The AV receiver always outputs analog signals.
Note
• The setting is stored individually for each input selector.
• This setting can be made only for the input source that is
assigned as
HDMI IN
,
COAXIAL IN
, or
OPTICAL IN
.
*1
You can select “
ARC
” if you select the
TV/CD
input selector.
But you cannot select it if you’ve selected “
Off
” in the “
Audio
Return Channel
” setting (
➔
49
).
Setting the Incoming Digital Signal (Fixed
Mode)
By pressing
ENTER
while selecting “
HDMI
”, “
COAX
”,
“
OPT
” in the “
Audio Selector
”, you can specify the input
signal in the Fixed Mode. Pressing
ENTER
again allows
you to return to the “
Audio Selector
” setting.
Normally, the AV receiver detects the signal format auto-
matically. However, if you experience either of the follow-
ing issues when playing PCM or DTS material, you can
manually set the signal format to PCM or DTS.
If the beginnings of tracks from a PCM source are cut off,
try setting the format to PCM.
If noise is produced when fast forwarding or reversing a
DTS CD, try setting the format to DTS.
`
Auto
:
The format is detected automatically. If no digital
input signal is present, the corresponding analog
input is used instead.
`
PCM
:
Only 2-channel PCM format input signals will be
heard. If the input signal is not PCM, the
PCM
indi-
cator will flash and noise may also be produced.
`
DTS
:
Only DTS (but not DTS-HD) format input signals
will be heard. If the input signal is not DTS, the
DTS
indicator will flash and there will be no sound.
Note
• The setting is stored individually for each input selector.
• The setting will be reset to “
Auto
” when you change the setting
in the “
Audio Selector
” (
➔
52
).
