21
En
With
u
(Remote Interactive), you can use the following
special functions:
■
System On/Auto Power On
When you start playback on a component connected via
u
while the AV receiver is on Standby, the AV
receiver will automatically turn on and select that com-
ponent as the input source.
■
Direct Change
When playback is started on a component connected via
u
, the AV receiver automatically selects that compo-
nent as the input source.
■
Remote Control
You can use the AV receiver’s remote controller to con-
trol your other
u
-capable Onkyo components, point-
ing the remote controller at the AV receiver’s remote
control sensor instead of the component. You must enter
the appropriate remote control code first (
➔
61
).
Note
• Use only
u
cables for
u
connections.
u
cables are supplied
with Onkyo players (DVD, CD, etc.).
• Some components have two
u
jacks. You can connect either
one to the AV receiver. The other jack is for connecting addi-
tional
u
-capable components.
• Connect only Onkyo components to
u
jacks. Connecting other
manufacturer’s components may cause a malfunction.
• Some components may not support all
u
functions. Refer to
the manuals supplied with your other Onkyo components.
• While Zone 2 is on, the System On/Auto Power On and Direct
Change
u
functions do not work.
• Do not use RI connections if you use HDMI Control (RIHD)
(
➔
49
).
Connecting Onkyo
u
Components
Step 1:
Make sure that each Onkyo component is connected
with an analog audio cable (connection
D
in the hookup
examples) (
➔
20
).
Step 2:
Make the
u
connection (see illustration below).
Step 3:
If you’re using an RI Dock, or cassette tape deck,
change the Input Display (
➔
27
).
L
R
IN
BD/DVD
L
R
IN
TV/CD
L
R
REMOTE
CONTROL
ANALOG
AUDIO OUT
L
R
ANALOG
AUDIO OUT
e.g., CD player
e.g., DVD player
