Appendix
En-78
The AV receiver can upconvert component video and
composite video sources for display on a TV connected to
the HDMI output(s). However, if the picture quality of the
source is poor, upconversion may make the picture worse
or disappear altogether.
In this case, try the following:
Tip
• To by-pass the upconversion, set the “
Picture Mode
” setting to
“
Direct
” (
➔
page 56
).
Important Note Regarding Video Playback
1
If the video source is connected to a component
video input, connect your TV to
COMPONENT
VIDEO OUT
.
If the video source is connected to a composite video
input, connect your TV to
MONITOR OUT V
.
2
On the main menu, select “Input/Output Assign”,
and then select “Component Video Input”
(
➔
page 49
).
If the video source is connected to
COMPONENT
VIDEO IN
, select the relevant input selector, and
assign it to “
IN1
”.
If the video source is connected to a composite video
input, select the relevant input selector, and assign it to
“
- - - - -
”.
Содержание HT-RC460
