Onkyo HT-R358, Инструкция по эксплуатации

Страница: 38 / 72

Advanced Operations
En-38
DTS
■
Neo:6 Music
Center Image
`
0 to 2 to 5
With this setting, you can specify by how much the front
left and right channel output is attenuated in order to create
the center channel.
Changing the value from “
0 ” to “ 5 ” will spread the sound
of the center channel to left and right (outwards).
Theater-Dimensional
■
Listening Angle
`
Wide :
Select if the listening angle is 40 degrees.
`
Narrow :
Select if the listening angle is 20 degrees.
With this setting, you can optimize the Theater-
Dimensional listening mode by specifying the angle of the
front left and right speakers relative to the listening
position. Ideally, the front left and right speakers should be
equidistant from the listening position and at an angle close
to one of the two available settings.
Items can be set individually for each input selector.
Menu Source Setup
A/V Sync
■
A/V Sync
`
0 ms to 400 ms in 10 msec steps
When using progressive scanning on your Blu-ray
Disc/DVD player, you may find that the picture and sound
are out of sync. With this setting, you can correct this by
delaying the audio signals.
To view the TV picture while setting the delay, press
ENTER .
To return to the previous screen, press RETURN .
The range of values you can adjust will depend on whether
your TV supports HDMI Lip Sync and if the “
LipSync ”
setting is set to “ On ” or not (
➔
page 42 ).
Note
• A/V Sync is disabled when the Direct listening mode is used with
an analog input source.
Preset Name For Input Selector
■
Name
`
- - - , Blu-ray , DVD , HD DVD , VCR , DVR , Tivo ,
CableSTB , SAT STB , PS3 , Wii , Xbox , PC , TV , CD ,
TAPE , iPod :
To reset to the default, select “ - - - ”.
You can enter a preset name for each individual input
selector for easy identification. When entered, the preset
name will be displayed.
Note
• You can’t assign the same preset name to multiple input selectors.
• This setting cannot be used for the
TUNER ( AM , FM ) input
selector.
20°/40°
Front left speaker Front right speaker
Source Setup
Preparation
Press the input selector buttons to select an input source.
1 2 3 4 5 6