Onkyo HT-R358, Инструкция по эксплуатации

Страница: 28 / 72

Turning On & Basic Operations
En-28
The Home menu provides quick access to frequently used
settings. You can change settings and view the current
information.
Note
• The on-screen menus are displayed when:
– There is no video input, or
– The video input is 480p, 576p, 720p, 1080i, or 1080p.
Note
*1 Depending on the input source and listening mode, not all
channels shown here output the sound.
*2 • This setting is not available in either of the following cases:
–The “ Audio TV Out ” setting is set to “ On ” (
➔
page 41 ).
–“ HDMI Ctrl (RIHD) ” is set to “ On ” (
➔
page 41
) and
you’re listening through your TV speakers.
You can use two sets of front speakers with the AV
receiver:
Speakers A for up to 5.1-channel playback in
your main listening room and Speakers B for 2-channel
stereo playback in another room.
Using the Home Menu
The on-screen menus appear only on a TV that is
connected to the
HDMI OUT . If your TV is connected
to other video outputs, use the AV receiver’s display
when changing settings.
1
Press RECEIVER followed by AUDIO .
The Home menu will be superimposed on the TV
screen.
2
Use q / w and ENTER to make the desired selection.
■
Input
`
You can select the input source.
Use q / w to select the desired input source.
Pressing ENTER switches to the selected input
source.
■
Audio
`
You can change the following settings: “ Bass ”,
“ Treble ”, “ Subwoofer Level ”, “ Center Level ”,
“ EX.BASS ”, “ Late Night ”, “ Music Optimizer ”,
and “ Cinema Filter ”.
See also:
• “Using the Audio Settings” (
➔
page 42 )
■
Info
*1
`
You can view the information of the following
items: “
Input ” and “ Output ”.
■
Listening Mode
*2
`
You can select the listening modes that are
grouped in the following categories:
“
MOVIE/TV ”, “ MUSIC ” and “ GAME ”.
Use
q
/
w
to select the category and
e
/
r
to
select the listening mode. Press
ENTER
to
switch to the selected listening mode.
Selecting Speakers A and B
1
Press
RECEIVER
once followed by
SP A/B
repeatedly to cycle through the selection:
Speaker indicators and output channels are shown
below.
Speaker indicators Output channel
Speakers A: 5.1 channels
Speakers A: 2.1 channels *3
Speakers B: 2 channels
Speakers B: 2 channels
No sound
*3 While Speakers B is on, channels are reduced to 2.1 in the
main room.
Tip
• Alternatively, you can use the AV receiver’s SPEAKERS
A and B .
Off
←
Speakers A
→
Speakers A&B
→
Speakers B
→
A
A B
B