5
FM Antenna
Connect the supplied FM wire antenna to the FM An-
tenna socket on the unit.
If reception is poor, connect the outside antenna.
Note:
Before attaching a 75 ohm coaxial lead (the kind with a
round wire going to an outside antenna), disconnect
the supplied FM wire antenna.
Caution:
To avoid noise, keep antennas away from the system,
the connecting cord and the AC power cord.
Speaker Connection
Caution:
To avoid damaging the speakers with a sudden high-
level signal, be sure to switch the power off before con-
necting the speakers.
Before connection
Check the impedance of your speakers. Connect
speaker with an impedance of 4
Ω
~ 16
Ω
.
The black speaker terminals are “-”±(negative).
Generally, the “+” side of the speaker cable is marked
to make it distinguishable from the “-”±side of the cable.
Connect this marked side to the “+” terminal and the
unmarked side to the black “-” terminal.
How to connect
1. Turn the terminal cap counterclockwise to loosen
it. The speaker terminal caps cannot be fully re
moved from the base.
2. Insert the wire into the terminal fully and turn the
terminal cap clockwise to securely connect it:
Subwoofer
Connect a subwoofer using a commercially-available
RCA cable. Use a subwoofer with built-in amplifier re-
ferred to as a “powered subwoofer”.
