32
and then press the TIMER button.
Select “On” to turn the timer function on. The TIMER
indicator (
) appears on the display.
When you do not use the timer, select “Off”. (The
TIMER indicator disappears from the display.)
7
Turn the unit on and prepare the source.
To play a disc, select “DVD Source” using the IN-
PUT button and set a disc.
To play a USB memory device, select “USB Source”
using the INPUT button and set a USB memory
device.
To listen to the FM, select “FM Radio” using the IN-
PUT button and tune in a station.
8
Press the
ON/STANDBY button to turn the unit
off (standby).
z
The unit will turn on at the specified time every day.
z
The unit turns on with the source that was last
selected.
Do not forget to turn the unit off (standby), or
the timer will not work.
If the timer reaches the timer-on time, the unit is set
to “SLEEP 60” automatically and the power will be
switched off (standby) 60 minutes later.
If you want to listen continuously, press the SLEEP
button repeatedly to select “SLEEP OFF” before
reaches the timer-off-time.
Troubleshooting
To keep the warranty valid, never try to repair the sys-
tem yourself. If you encounter problems when using
this unit, check the following points before requesting
service.
No power.
-
Ensure that the AC cord of the apparatus is
connected properly.
-
Ensure that there is power at the AC outlet.
-
Press the
ON/STANDBY button to turn the unit
on.
No disc detected
-
Insert a disc.
-
Check if the disc is inserted upside down.
-
Wait until the moisture condensation at the lens has
cleared.
-
Replace or clean the disc.
-
Use a finalized CD or correct format disc.
No picture
-
Check the video connection.
-
Turn on the TV to the correct Video-In channel.
-
Progressive scan is activated but the TV does not
support progressive scan.
Black and white or distorted picture
-
The disc does not match the TV color system
standard (PAL/NTSC).
-
Sometimes a slight picture distortion may appear.
This is not a malfunction.
-
Clean the disc.
-
A distorted picture may appear during progressive
scan setup.
The aspect ratio of the TV screen cannot be changed
even though you have set the TV display format.
-
The aspect ratio if fixed on the loaded DVD disc.
-
The aspect ratio may not be changed for some TV
systems.
No sound or poor sound
-
Adjust the volume.
-
Disconnect the headphones.
-
Check that the speakers are connected correctly.
-
Check if the stripped speaker wires are clamped.
Remote control does not work
-
Before you press any function button, first select
the correct source.
-
Reduce the distance between the remote control
and the unit.
-
Insert the battery with its polarities (+/-) aligned as
indicated.
