36
En
You can hide the display of those inputs that are not used,
so that they are skipped when selecting an input. Change
any input from the following:
L1
(
LINE1
),
L2
(
LINE2
),
L3
(
LINE3
),
CX1
(
COAX1
),
CX2
(
COAX2
),
OPT
,
PNO
(
PHONO
)
■
Operating with the remote controller
■
Operating on the integrated amplifier
Tip
• The default setting is ON.
Note
• The current input doesn’t appear as selectable. For example, if
the input is currently set to “
LINE1
”, “
L1
” won’t appear as
selectable.
• The integrated amplifier will end the setup if there is no
operation for 8 seconds.
Skipping Unused Inputs
1
Press
SETUP
.
2
Press
!
/
"
repeatedly to select “SHOW”.
3
Press
ENTER
.
4
Press
!
/
"
repeatedly to select the input you want
to change.
5
Press
#
/
$
to switch between ON and OFF.
`
ON:
Shows the display of selected input.
`
OFF:
Hides the display of selected input.
The setting is automatically confirmed.
6
Press
RETURN
repeatedly to exit the setup.
SETUP
!
/
"
/
#
/
$
ENTER
RETURN
1
Press
SETUP
repeatedly to select “SHOW”.
2
Use the
INPUT
selector to select the input you want
to change.
3
Press and hold down
SETUP
.
The setting is switched ON/OFF.
The setting is automatically confirmed.
4
Press
SETUP
repeatedly to exit the setup.
SETUP
INPUT
selector