21
En
Use the
MM/MC
selector on the back of the integrated amplifier to select either
MM
or
MC
, in accordance with the
cartridge format of the turntable.
Remove the short pins plugged into the jacks before connecting a turntable to the
PHONO
inputs.
Note
• Always turn off the integrated amplifier before switching between
MM
and
MC
.
Tip
• If your turntable has a built-in phono preamp, you can connect the turntable to other analog inputs such as
LINE IN 1
.
• If your turntable has a ground wire, connect it to the
GND
screw. With some turntables, connecting the ground wire may produce an
audible hum. If this happens, disconnect it.
Tip
• Connect your cassette tape deck to either of the following jacks:
LINE IN 1
/
2
/
3
.
Connecting a Turntable
Connecting a Cassette Tape Deck
L
R
AUDIO
OUTPUT
Turntable without a built-in
phono preamp
Integrated Amplifier A-9070
MM/MC
selector
AUDIO
OUT
L
R
Integrated Amplifier A-9070
Cassette tape deck