Onkyo A-9070, Инструкция по эксплуатации, Страница: 31 / 44

31
En
You can temporarily mute the output of the integrated
amplifier.
Note
• While the integrated amplifier is muted:
– Adjusting the volume or setting the integrated amplifier to
Standby will unmute the integrated amplifier.
– Pressing
INPUT !
/
"
on the remote controller or turning the
INPUT selector on the integrated amplifier will display the
current input for 3 seconds.
• If MUTING is pressed while a setting is being performed, the
setup will be terminated.
• Even if the power cord is unplugged, the muting function will be
maintained on to the next session.
Tip
• If there’s a volume difference between your speakers and your
headphones, you can adjust the offset level (
➔
page 37
).
Note
• Always turn down the volume before connecting your
headphones.
• When headphones are connected, the balance adjustment and
SPEAKERS are disabled. Pressing the buttons will display the
message “ PHONES ”.
Muting the Sound
1
Press MUTING .
The message “ MUTING ” flashes on the information
display.
To unmute the integrated amplifier, press
MUTING
again.
MUTING
Using Headphones
1
Connect a pair of stereo headphones with a
standard plug (1/4 inch or 6.3 mm) to the
PHONES
jack.
When connecting the headphones, the message
“
PHONES ” appears on the information display and
the
A
/
B
LEDs go off.
You can adjust the volume and mute the sound, by
using
VOLUME q
/
w
.
While headphones are connected, no sound is output
from the speakers and
PRE OUT jacks.
PHONES jack