Customer Helpline: 1300 886 649 (AU) | 0800 836 761 (NZ)
12
Record
1. Start Recording
Click “
” in the main interface to enter the pre-recording status. Click “
” icon to enter the submenu, you may set the recording quality, volume and
the desktop.
Click “ ” icon to start recording, click “ ” icon again to pause. Click “ ”
icon, the display prompts “Save record file?” Select “Yes” to save it, the player
prepares for the next recording. Click “ ” icon to exit the recording mode.
2. Play recorded file
Select “
” in the main interface, and then select “Record” enter. Click the file
you want to start playback.
3. Setup of record
Click “ ” icon to enter the submenu of record under the pre-record mode.
There are three options: quality, Volume and Desktop.
• Quality: Low rate, High rate. The former has small files but lower effect, while
the latter has large files but good quality.
• Volume: 1, 2, 3, 4, 5. The larger the number is, the louder the recorded files
are.
• Desktop: There are four options.
NOTE:
if the display prompts “Disc Full!” it means that there’s not enough
space to record new files. Please delete other files to release space.
Operating Instructions
