Page 9 of 12
CAUTION
: Even after the heater has been turned off, the heater will remain very hot
for some time after.
DO NOT
touch the hot surfaces during heating or after turned off.
•
If you wish to just recirculate the room air without heating, turn the Fan / On-Off / Heat
Control Switch to position “
”.
•
To turn the heat and/or fan off, turn the Fan / On-Off / Heat Control Switch to position
“
O
“
Note: Keep children away from the heater at all times.
Always Turn off and unplug when not in use.
6 Safety Cut-Off Device
This heater is fitted with a Safety Cut-out Device to prevent injury or damage should the
internal temperature exceed the safe operating temperature.
•
Should the heater turn off unexpectedly, first unplug the appliance from the wall power
point and let cool. It is more than likely that the thermal Cut-Off device has activated
•
This may have been caused by either the Rear Air Inlet grille being blocked (or
partially block), the fan stopping due to a foreign object being inserted into the fan, the
front air outlet grill being blocked (or partially blocked) or a build up of dust and fluff
etc, inside the appliance.
•
The appliance cannot be reset and must be taken to your nearest electrician for
repairs.
Please note: The Thermal Cut-Off device will not activate during normal use. Refer to
the notes in “Important Safeguards” to prevent this from happening.
7 Cleaning
Before any maintenance or cleaning work is carried out, DISCONNECT the appliance
from the ELECTRICITY supply.
Wipe the outer surfaces with a slightly moistened cloth.
Note
: Do not use detergents, abrasive powders, highly perfumed cleaning products, wax
polishes or products containing alcohol, etc. as these may damage the unit.
Dry the appliance thoroughly.
Any dust build up in the grille can be vacuumed out.
DO NOT
place any objects into the
grille.