Page 8 of 12
5 Operation
5.1 Controls
•
Ensure the Fan control is set to the “O” (Off) position.
•
Fully unwind the power cord then plug into the powerpoint and switch on.
•
When first setting up the temperature setting, turn the Fan / On-Off / Heat Control
Switch to Maximum Power “II” and turn the Adjustable Room Thermostat fully
clockwise to maximum.
•
The Indicator light will illuminate indicating the element is heating.
•
When the room reaches the desired temperature, slowly turn the Adjustable Room
Thermostat down (anticlockwise) until you hear it “Click” off. The indicator light will turn
off.
•
Leave the Adjustable Room Thermostat in this position and the heater will now cycle
on and off and maintain the desired room temperature.
Note
: The indicator light will turn on and off as the heating element turns on and off.
As the thermostat maintains room temperature it will switch on and off.
As it switches on and off, you may notice a blue flash from inside the heater. This is
NOT dangerous and no cause for alarm
•
At the same time, you may turn the Fan / On-Off / Heat Control Switch down to the
Low Heat setting “I” to reduce the power consumption. This will however increase the
amount of time it takes to reheat.
•
On very cold days this may not be practical, as heat losses can exceed the heat
generated by your heater. Larger rooms and open space areas may also find the low
or medium heat setting ineffective.
•
You will need to experiment with this heater to establish the exact setting required for
any particular room or space.
•
Best performance and efficiency is achieved with an insulated home, closed windows
& doors and with drapes closed.