OneScreen Canvas c4, Руководство пользователя

Страница: 22 / 26

22
onescreensolutions.com | +1 858.552.0290 | United States| Pakistan
|
Colombia | Mexico | UAE
Use a Straight through Female to Female cable. Connect RS-232 cable between control
Processor and OneScreen display. Set your program RS -232 port to the setting below.
Control is one-way serial. However you may receive feedback when sending the power
on/off commands.
Port number: COM1(set according the PC or Central control equipment)
Bit rate 115200 Parity check: NO
Data byte: 8 Stop byte: 1
Note: Each command must be terminated with a Carriage Return \x0D
Hex notation has to be used when sending commands.
Function Required Command
Power On 55 00 8E 00 E3
Power Off 55 00 8D 00 E2
Source 55 00 80 00 D5
Up 55 00 00 01 56
Down 55 00 00 02 57
Left 55 00 00 03 58
Right 55 00 00 04 59
OK 55 00 00 00 55
Menu 55 00 14 00 69
Exit 55 00 16 00 6B
Info 55 00 18 00 6D
Mute 55 00 1A 00 6F
Sleep Mode 55 00 20 00 75
Sound Mode 55 00 22 00 77
Picture Mode 55 00 28 00 7D
Set Sleep Timer 55 00 4A 00 9F
Aspect Ratio 55 00 4C 00 A1
Volume Increase 55 00 0C 00 61
Volume Decrease 55 00 0E 00 63
Return 55 00 0A 00 5F
Switch Source to YPbPr 55 00 80 04 D9
Switch Source to VGA 55 00 80 05 DA
Switch Source to HDMI 1 55 00 80 08 DD
Switch Source to HDMI 2 55 00 80 09 DE
Switch Source to HDMI 3 55 00 80 11 E6
Switch Source to DP 55 00 80 15 EA
Switch Source to On-board PC (OPS) 55 00 80 0B E0
Switch Source to AV in 55 00 80 0C E1
Switch Source to USB 55 00 80 0F E4
7.1 Settings for RS 232 Control
7. RS 232 Guide
7.2 RS 232 Commands