Ref: RD-HGHGW050300-EN-02
UDgateway - Hardware Guide
UDgateway Installation
13
Before installing a UDgateway®
3.3.
Pre-requisites
3.3.1.
Before installing the UDgateway®, check that following requirements have been met.
Network access
3.3.1.1.
The standard scenario to configure UDgateway is using a web browser through TCP/
IP connectivity.
Any computer with an OS supporting a standard TCP/IP stack and a recent web
browser will do.
Console access
3.3.1.2.
In some scenarios, where you cannot connect to the UDgateway through Ethernet
(TCP/IP) and a web browser, you may need to access the UDgateway through a
console port. to restore connectivity.
UDgateway console port can be accessed either through:
- screen or keyboard (connected to the UDgateway)
- or a serial connection (which requires a serial crossover cable connected between
UDgateway serial port and computer as well as a serial terminal software installed
on computer).
Note
: The UDgateway serial port default configuration parameters are:
- Baud rate: 115200
- Data Bits: 8
- Parity: None
- Stop bits: 1
- Flow control: None
Tools
3.3.1.3.
No specialised tools are recommended other than tools found in a standard telecom
installation engineers toolkit.
