Ref: RD-HGHGW050300-EN-02
UDgateway - Hardware Guide
UDgateway Overview
9
Hardware model : H2
2.3.
The UDgateway® is intended for installation in 19-inch telco racks.
Characteristics:
- Standard 19 inch rack mounting, 1U height
- Cover and housing: metal
Note
: The UDgateway hardware model H2 has no Ethernet bypass board.
Note
: H2 model has no HP iLO software license installed, preventing remote
console access through HP iLO interface.
2.3.1.
Front Panel
A number of elements are situated on the front panel of the UDgateway that enable
you to check that the UDgateway is correctly connected..
5
6
2
4
3
1
UDgateway - H2 hardware - Front Panel
Figure 5 -
1
Power On/Standby button and system power LED
Green = system is on
Amber = System is shut down, but power is still applied
Off = Power cord is not attached, power supply failure has occurred, no power
supplies are installed, facility power is not available, or the DC-to-DC converter is
not installed.
2
UID button/LED
Blue = Identification is activated
Flashing blue = System is being remotely managed
Off = Identification is deactivated.
3
Internal health LED
Green = System health is normal
Amber = System is degraded. To identify the component in a degraded state,
refer to system board LEDs.
Red = System critical. To identify the component in a critical state, refer to system
board LEDs
Off = System health is normal (when in standby mode).
4
External health LED (power supply)
Green = Power supply health is normal
Amber = Power redundancy failure occurred
Off = Power redundancy failure has occurred. When the server is in standby
mode, power supply health is normal.
