OFA Kameleon™ 6-Device Hybrid Remote
12 Using Channel Scan
7.
Repeat step 6 up to three more times to
add the other desired devices to the
power-on sequence (e.g.,
AUX
,
VCR/PVR
, etc.).
8.
To save the settings and exit the
program, press and hold
SET
until the
Inner IR segments blink twice, then
release
SET
.
T
O
O
PERATE
M
ASTER
P
OWER
M
ACRO
1.
After programming, point the remote
control at the devices and press
POWER
for at least 3 seconds to
sequentially turn on (or off) your
devices.
NOTE:
When
POWER
is pressed for less than
3 seconds, a power command will only be
sent to the currently-selected device. This
allows you to still individually power
devices on or off.
2.
Devices will turn on (or off) according
to your programmed sequence.
NOTE:
The currently-selected device will
always turn on or off first, followed by the
remaining programmed sequence. After the
master power sequence has been
completed, the remote control will be set to
control the first powered-on device.
NOTE:
If one or more devices does not have
a
POWER
key, the power off/on sequence
may be slightly delayed when the remote
control signals the device(s).This action is
normal.
C
LEARING
A M
ACRO
1.
Press and hold
SET
until the two Inner
IR segments flash twice. The current
mode key will blink on and off during
programming.
2.
Enter
9 9 5
. The Inner IR Animation
will blink twice.
3.
Select a macro key (e.g.,
M1
,
POWER
or
any key programmed with a macro)
you want to clear and press it once.
4.
Press and hold
SET
until the two Inner
IR segments flash twice, then release
SET
. The macro is now deleted but the
keys (in the case of power), will retain
their original function.
USING CHANNEL SCAN
In the
TV
,
VCR/PVR
,
DVD
and
CBL/SAT
modes, use the
FAV
key to start a 3-second
scan of all favorite channels (if
programmed, see Programming Favorite
Channel Scan below) and/or all channels for
the selected mode.
1.
Press
TV
,
VCR/PVR
,
DVD
or
CBL/SAT
once.
2.
Press
FAV
once.
•
If Favorite Channel Scan has been
set up, scanning of favorite
channels will start and, upon
completion, continue to scan all
channels upward for the same
device.
•
If Favorite Channel Scan has not
been set up, scanning will start
with the current channel, then
proceed to the next channel up,
and continue until all channels of
the selected device is scanned.
3.
To stop scanning channels at any time,
press any key once.
PROGRAMMING FAVORITE
CHANNEL SCAN
In the
TV
,
VCR/PVR
,
DVD
and
CBL/SAT
modes, you can store a list of up to 10
favorite channels, in any order, that will be
OFA Kam 6 Hybrid Owners Manual Fr-Eng.fm Page 12 Monday, April 11, 2005 12:45 PM
