12
Then,
press and hold the MAGIC
key until the display
screen changes to [TIMED SEQ].
Press
MENU- once
, the display will change to [CODE
SETUP]. Press
ENTER
and the display will change to [DEV
SET UP].
Press
ENTER
. Then, if necessary, use the
MENU-
key to
locate the device you want based on the chart above (for
example, if you are setting up a Cable Converter, you
would need to press MENU- once until CABLE is displayed
on the screen).
Then, enter your
three-digit device code
using the
number keys, then press
ENTER
.
Aim the Topline 8 at your device and press
POWER
. Your
device should turn off. If your device turns off, press the
ESC
key to return to the main screen.
If your device does not turn off,
enter the next code
in
the list then press
ENTER
. Next, press
POWER
to see if
your device turns off. Once your device turns off, you have
found the correct code. Press the
ESC
key to return to the
main screen.
Write the code for your device(s) in the boxes on page 14 for easy future
reference.
Basic Functions
Notes:
- To control your device, press the device key first.
- Only one device (CD, amplifier, cassette, etc.) can be assigned to a device
key. If your original remote operates more than one device (for example,
a receiver, CD player and cassette player in one remote), you will need to
set up each device separately.
- If your device’s original remote control does not have a power key, press
PLAY instead of POWER during step 7. (Make sure a tape or disc is
inserted.)
- To set up more than one device, before pressing the ESC key during step
7, you can press the next device key you want to program and enter the
code for that device.
- If your Device does not respond, try every code listed for your brand
during step 7. If none of the codes listed operate your Device, try the
Search Method described on page 13, even if your brand is not listed at
all.
4
5
6
7
3
