The Topline 8 Sleeptimer
Your Topline 8 remote comes with an internal Sleeptimer function for those
devices (TV or Satellite) which did not come standard with this function. To
use the Topline 8’s Sleeptimer:
Making your Topline ready for Sleeptimer:
Press and hold
MAGIC
until the display reads [TIMED
SEQ].
Press the
MENU- KEY twice
until the display changes to
[CONFIGURE]. Press
ENTER
and the display will change to
[THEATR SEL].
Press the
MENU+ key four times
until the display
changes to [SLEEP LOCK]. Press
ENTER
and the display will
read [DISABLE].
Press
MENU- one time
to change the display to [ENABLE]
then press
ENTER
to return to the main screen. It is only
necessary to perform steps 1-4 once. Now to set the timer,
continue will the steps below.
Setting the Topline 8’s Sleeptimer:
It is possible to set the timer for 15, 30, 45 or 60 minutes. To do this, first
make sure your TV (or Satellite) is switched on. Then,
Press
SHIFT
and then
POWER
. The display will read [SLEEP
15]. To increase the timer, use the
MENU+
key.
Once you have set the timer to the desired time, press
ENTER
. The display will read [SLEEP and the time]. Now
set the Topline 8 remote down, pointing it at your device.
When the programmed amount of time has elapsed, the
Topline 8 will send the command for Power, hence
turning off your device.
24
Advanced Functions
Notes:
- To deactivate the Sleeptimer, press Power on the Topline 8.
- Also, it is only necessary to follow steps 1-2 above one time. For
subsequent use of the Sleeptimer, simply begin with “Setting the
Sleeptimer”.
- Remember, when using the Topline 8’s Sleeptimer, you must set the
remote so it is pointing at your device.
2
3
4
1
x 4
1
2
