8
Testing the Code for Maximum Functionality
1.
Try a variety of the device’s functions with the remote. If
some features of your devices don’t work, go to the next
step to try a different code.
2.
Repeat the Manual Code Search and Entry Method from
the beginning. When the device turns off for the first time,
don’t press the OK key, which would store the same code.
Instead, with the unit now off, continue to press the SKIP
FWD key repeatedly until the unit turns back on.
3.
Once the unit turns back on, you have found another code
that operates the device. Press the OK key.
4.
Test the key’s functionality again by trying a variety of
functions. If the code controls the majority of the device’s
functions, programming is complete. If the code stored
does not give maximum functionality, try another code.
NOTES
4HROUGHOUTTHEPROGRAMMINGOFEACHKEYKEEPTHEREMOTE
pointed at the IR sensor of the device you are programming
the remote to control.
4ESTTHEREMOTEWITHTHEDEVICETOMAKESURETHEDEVICE
KEYISPROGRAMMEDWITHTHECORRECTCODEFORMAXIMUM
FUNCTIONALITY)FSOMEFEATURESDONTWORKTRYADIFFERENT
CODE3EETHEh4ESTINGTHE#ODEFOR-AXIMUM&UNCTIONALITYv
SECTIONBELOWFORMOREINFORMATION
$URINGTHE-ANUAL#ODE3EARCHTHEREMOTEIGNORES
KEYPRESSESTHATARENTPARTOFTHESEARCH
4HESEARCHTIMESOUTAFTERTWOMINUTESTHE0/7%2KEYBLINKS
four times and the last programmed code under that device
KEYISRETAINED
4HE0/7%2KEYBLINKSFOURTIMESWHENTHEREMOTEHASGONE
THROUGHALLTHECODES4HEREMOTEEXITSTHE-ANUAL#ODE
3EARCH)FYOURDEVICEHASNTTURNEDOFFYETTRYADIFFERENT
search method.
