PROGRAMMING DEVICE CONTROL
(continued)
6.
Repeat steps 1 through 5 (on the previous
page) for each device you want to control.
For future reference, write down each
working device code in the following boxes:
TV
Code:
PVR
Code:
DVD
Code:
CBL/SAT
Code:
AUD
Code:
VCR
Code:
PROGRAMMING DVD PLAYER/VCR
COMBO CONTROL
1.
Turn on the DVD Player/VCR Combo and
insert a DVD.
NOTE: Please read steps 2 through 4 completely
before proceeding. Highlight or write down the
codes and device you wish to program before
starting step 2.
2.
On the remote control, press
DVD
. Next,
press and hold
SET
until the
LED
(red light)
blinks twice, then release
SET
.
3.
Use the
Setup Codes For DVD Player/VCR
Combos
(on page 21) to locate the brand
name and then enter the first four-digit
code for your device. If performed
correctly, the
LED
will blink twice.
NOTE: If the
LED
did not blink twice, repeat steps
2 through 4 and enter the same code again.
4.
Aim the remote control at the device and
press
POWER
once. It should turn off. If it
does not, repeat steps 2 through 4, trying
each code for your brand until you find one
that works. If it still does not work, try
Searching For Your Code
on the next page.
NOTE: If the device does not have a
POWER
key, press the
(Play) key.
10
OFA 6 PVR 2/15/03 9:25 AM Page 10
