11
Main image width：
minimum value is 62，maximum is “LED screen
width”(example：
1024 for the 1024x768@60Hz
）
Main image height：
minimum value is 48，maximum value is “LED screen height”
(example：768 for the 1024x768@60Hz）
Horizon starting ：
minimum is 0 ,the maximum is “LED screen width” and the
“main image width ”difference value
Vertical starting ：
minimum is 0 ,the maximum is “LED screen height” and the
“main image height ”difference value
Sending card parameters：
set the network display image size and starting position for
example: network port 1
Network port 1 width
：
range from 0-3840
，
set LED1 port image horizontal width
Network port 1 height
：
range from 0-3840
，
set
set LED1 port image vertical height
Network port 1 starting position X
：
range from 0-3840
，
set the LED 1 display image
horizontal starting position
Network port 1 starting Y
：
range from 0-3840
，
set LED1 port image vertical starting
position
Test diagrams :
there are 6 test diagrams for LED screen testing.The test diagram requires an
out-of-sync clock, so it is only valid for the DVI/HDMI/VGA input source.When the "normal display" is
selected, the test diagram is closed.In the current signal source, a valid input signal must be received, and
the test diagram has output. Otherwise, there is no output.If the current signal source is DVI, the DVI port
input output is connected, and this function can be realized without external input signal.
image effect menu
image effect interface can adjust the brightness
、
contrast
、
saturation
、
dynamic contrast and color
temperature
Brightness
：
range from 0-100
Contrast
：
range from 0-100
Saturation
：
range from 0-100
Dynamic contrast
：
range from 0-4
，
0 is close ,1 is default value,not valid to the input VGA
signage source.
Image effect
Brightness
50
Contrast
50
Saturation
48
Dynamic contrast
1
Color temperature
→
Содержание OVP-M3
Страница 1: ...OVP M3 User Manual OVP M3 USER MANUAL...
Страница 25: ...22...
