Onbon OVP-M3, Руководство пользователя

Страница: 20 / 26

17
Step 2 ： Choice input signal source
Step 3 ： set the screen width and height
In guide setting status,press[ ] to return to the previous step to modify the parameter
Guide mode
When the machine is power on,it will show the following interface
Press [OK] button to run into the “input” interface
，
as shown in picture
Switch the signage source by press the front panel signage selection key ,short press the [OK]
button to save the data and enter the "LED screen parameters setting" interface,as shown in picture