ON Semiconductor AP0201AT, Руководство пользователя

Страница: 3 / 6

AP0201ATSL00XEGAH3 − GEVB
www.onsemi.com
3
Jumper Pin Locations
The jumpers on headboards start with Pin 1 on the
leftmost side of the pin. Grouped jumpers increase in pin
size with each jumper added.
Figure 5. Pin Locations for a Single Jumper. Pin 1 is Located at the Leftmost Side
and Increases as it Moves to the Right
Pins 1 − 4 Pin 1
Figure 6. Pin Locations and Assignments of Grouped Jumpers.
Pin 1 is Located at the Top-Left Corner and Increases in a Zigzag Fashion Shown in the Picture
Pins 1 and 2 Pin 1
Pins 3 and 4
Pins 5 and 6
Pins 7 and 8
Pins 9 and 10
Jumper/Header Functions & Default Positions
Table 1. JUMPERS AND HEADERS
Jumper/Header No. Jumper/Header Name Pins Description
P5, P47 EEPROM Mode
P5 Closed,
P47 Open (Default)
Set to Host Mode during Power On
P5 Open,
P47 Open
Set to Flash Mode during Power On
P47 Closed Set to Auto-Config Mode during Power On
P8 +5V0 2 − 3 (Default) Using On-Board +5V0 Power Supply
1 − 2 Using +5V0 Supply from External Power Adapter
P11 ON_LED 1 − 2 (Default) Connects to On-Board to Indicate “Power On”
P12 +2V8_VDDPHY
2 − 3 (Default) Using On-Board +2V8_VDDPHY_ADJ Power Supply
1 − 2 Using +2V8_VDDIO_HB Power Supply from Demo 3
Baseboard
P13 +VDDIO_LS
2 − 3 (Default) Using On-Board Power Supply
1 − 2 Using +1V8_HB Power Supply from Demo 3
Baseboard
P14 +2V8_VAA_OTPM 2 − 3 (Default) Using On-Board +2V8_VAA_OTPM_ADJ Power Supply
1 − 2 Using +2V8_VAA_HB Power Supply from Demo 3
Baseboard
P16 MCLK_IN
1 − 2 (Default) Connects to On-Board Oscillator
2 − 3 Connects to XMCLK
P19 +VDDIO_SENSOR 2 − 3 (Default) Using On-Board Power Supply
1 − 2 Using +1V8_HB Power Supply from Demo 3
Baseboard