ON Semiconductor AP0201AT, Руководство пользователя

Страница: 4 / 6

AP0201ATSL00XEGAH3 − GEVB
www.onsemi.com
4
Table 1. JUMPERS AND HEADERS
(continued)
Jumper/Header No. Description Pins Jumper/Header Name
P21 +VDDIO 2 − 3 (Default) Using On-Board Power Supply
1 − 2 Using +1V8_HB or +2V8_HB Power Supply from
Demo 3 Baseboard
P22, P23 OSC/XTAL Select
P22 2 − 3,
P23 Open (Default)
Oscillator/Demo Clock Selected
P22 1 − 2,
P23 Closed
On-Board Crystal Selected
P24 +3V3
2 − 3 (Default) Using On-Board Power Supply
1 − 2 Using +3V3_HB Power Supply from Demo 3
Baseboard
P25, P34 I/O Expander Address
P25 Closed,
P34 Open (Default)
I/O Expander Address Set to 0x48
P25 Open,
P34 Open
I/O Expander Address Set to 0x4C
P25 Open,
P34 Closed
I/O Expander Address Set to 0x44
P25 Closed,
P34 Closed
I/O Expander Address Set to 0x40
P27 LSC EEPROM
1 − 2 Closed,
3 − 4 Open (Default)
EEPROM Address Set to 0xA8
1 − 2 Open,
3 − 4 Open
EEPROM Address Set to 0xAC
1 − 2 Open,
3 − 4 Closed
EEPROM Address Set to 0xA4
1 − 2 Closed,
3 − 4 Closed
EEPROM Address Set to 0xA0
P30 Sensor Access SCL Open (Default) Beagle Serial No Access to Demo 3 & Sensor
1 − 2 Beagle Serial Access to Demo 3 & Sensor
P31 Sensor Access SDA
Open (Default) Beagle Serial No Access to Demo 3 & Sensor
1 − 2 Beagle Serial Access to Demo 3 & Sensor
P32 Diag Operation
Open (Default) Disable Diag Operation
1 − 2 Enable Diag Operation
P36 ENLDO 2 − 3 (Default) Internal Regulator Not Enabled
1 − 2 Regulator Enable
P37 EXT_REG
1 − 2 (Default) Select External Regulator
2 − 3 Select Internal Regulator
P38 STANDBY
2 − 3 (Default) Active Mode
1 − 2 Standby Mode
P39 SADDR
2 − 3 (Default) I
2
C Address Set to 0x90
1 − 2 I
2
C Address Set to 0xBA
P40 FRAME_SYNC
2 − 3 (Default) GND
1 − 2 Connect to Demo 3 Trigger
P41 +1V8_VAA
2 − 3 (Default) Using On-Board +1V8_VAA Power Supply
1 − 2 Using +1V8_HB Power Supply from Demo 3
Baseboard
P42 TRST_N
2 − 3 (Default) Normal Mode
1 − 2 Test Mode for Image System Processor
P49 TRST_NET_N
2 − 3 (Default) Normal Mode
1 − 2 Test Mode for Image Agent Processor
P50 SEN_SCLK
2 − 3 (Default) AP0201 Serial Control
1 − 2 Demo 3 Serial Control