background image

On-Hold Plus and MessageStudio are registered trademarks of IntelliTouch Communications.  © IntelliTouch Communications. All rights reserved. 

No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of IntelliTouch Communications. 

800-839-7277

www.onholdplus.com

FCC Information 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable 
protection against harmful interference in a residential installation.  This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications.  However, there is no 
guarantee that interference will not occur in a particular installation.  If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is   
  connected.
- Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly approved in this manual 
could void your authority to operate this equipment.

Precautions

Installation

Never install the unit where it would be subjected to:
- heat sources such as radiators or air ducts.
- direct sunlight. 
- excessive dust.
- moisture or rain.
- mechanical vibration or shock.
- unleveled surface.

• When the unit is used with an AC power adapter, do not wrap the unit in a cloth, blanket, etc.  If you do so, 

the temperature inside and   outside the unit may rise considerably, resulting in malfunctioning of the unit 
or serious accidents.

• If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may 

condense on the lens inside     the unit.  Should this occur, the unit will not operate.  In this case, remove the 
disc and leave the unit in a warm place for several hours until the moisture evaporates.

• For the unit to operate at its best, it should not be subjected to temperatures below 5˚C (41˚F) or above 35˚C 

(95˚F).

Warnings

• Before operating the unit, please read this manual thoroughly and retain it for future reference.

• To prevent fire or shock hazard, do not expose the unit to rain or moisture.  To avoid electrical shock, do not 

open the cabinet.  Refer servicing to qualified personnel only.

• The use of optical instruments with this product will increase eye hazard.

Care & Maintenance

Cleaning

 -- Do not use volatile chemicals on this unit.  Clean by lightly wiping with a soft cloth.

Customer Support

Toll-free customer support is available from 8AM to 5PM (PST) Monday thru Friday by calling 800-839-7277

Information

Содержание OHP 4000 Series













Отзывы: