OHP 4000 Series User Manual
Operation
Playback
Playing Audio Stored in Memory
By default, the unit is always in "playback" mode. When unit is playing,
the LCD will display a running time and the segments on the speaker icon
will move.
Playback After Power Loss
If power to the unit is lost, the unit will resume playback as soon as power
is reapplied. The unit retains its recorded content after power loss.
Recording
Auto Recording
A special software program called MessageStudio has been included which
allows you to make your own on-hold message productions. Each
production made with MessageStudio will include specially encoded sync
tones which will automatically start and stop the recording process on the
OHP 4000.
These tones will not be recorded.
To record from other CDs or
music sources, see "Manual-Recording" section on the following page.
Beginning Auto Recording
To begin recording using MessageStudio software, simply press "Play Mix"
button on the MessageStudio Player software screen. A start tone will be
heard and the unit will begin recording automatically. When finished, a
short series of tones will signal the unit to stop recording. After recording,
the unit automatically returns to active play mode.
NOTE:
During recording, the LCD will display a moving arrow from the CD
icon to the memory chip icon. You will hear what is being recorded
through the built-in preview speaker. When recording is finished, the
counter on the LCD will display a running playback time.
IMPORTANT:
To avoid inadvertent erasure of stored audio program,
remove "Connector Cable B" from the OHP 4000's "AUDIO IN" jack when
recording is finished.
5
