DUKE EASY S.T.01/3AW Rev.0 01/2017
18
If the instrument is equipped with optical fibres lighting system, these are switched on by pressing
The command
, place on command pad table (when the function is on, it affects all instruments).
The activation of the function is displayed by the lit led (D).
SCALER MODULE
Generator operation is achieved by lifting the instrument from its place, moving it to the surgical field
and then pressing the foot controller lever (see operation section GENERATOR).
Lifting the instrument by the table are inhibited all other dynamic tools and all the movements of the
dental chair.
To adjust the water to spray one acts on the faucet in place behind the dental chair. By turning the tap
clockwise you get a gradual decrease of water flow to the spray until its complete exclusion, the opposite
rotating in the opposite direction. It is recommended not to intervene in other regulations placed at the
side of the spray faucet.
If the instrument is equipped with optical fibres lighting system, these are switched on by pressing
the command
, placed on the command pad of the table (when the function is on, it affects all
instruments). The activation of the function is displayed by the lit led (D).
For more details see the attached manufacturer's instructions.
For the scaler SATELEC NEWTRON SP power regulation must be done according to the tip on the
handpiece.
SYRINGE MODULE
The syringe operates at any time by simply pressing one of the two levers enabling either water or air
supply (left-hand lever for water and right-hand lever for air). When these two supply buttons are
pressed simultaneously, spray water is delivered.
For further details refer to the manufacturer’s operating instructions enclosed.
