![background image](http://html1.mh-extra.com/html/omron/xw6t-series/xw6t-series_manual_743102001.webp)
1
Common Terminal Blocks with Visible Indicators
XW6T
Downsize Control Panels and Save Work
with Common Terminal Blocks with
Visible Indicators
• Indicators make wiring completion simply visible.
Proper wiring without skillful operators.
• Simply check the indicators for wiring maintenance,
helping reduce maintenance works.
• Short Bars enable pre-connected common wiring. No
troublesome crossover wiring required.
• The best-in-class slim models available to help downsize
control panels.
• Wiring system interface with Push-In Plus technology enables
no loosening of wiring, providing a maintenance-free operation.
Model Number Legend
Model Reference
Use this legend when determining the product specifications from the model number. Select models from
Ordering Information
for orders.
Part Names and Configuration
Terminal Block
Basic Configuration
For the most recent information on models that have been
certified for safety standards, refer to your OMRON
website.
Refer to
Safety Precautions
on page 11.
XW6T - COM
@@
X
@@@@
(1)
(2)
(3)
(2) Number of Pins
8: 8 pins
12: 12 pins
16: 16 pins
20: 20 pins
40: 40 pins
(1) Maximum Applicable
Stranded Wire
1.5: 1.5 mm
2
2.5: 2.5 mm
2
(3) Color of Short Bars
RD: Red
BL: Blue
YL: Yellow
Terminal (insertion) hole
Release hole (to release wire)
Label attachment section
Indicator
(Wire insertion state indication part)
Insertion hole for Short Bars
• Insert the tester pins here to
perform a continuity check.
Note:
Do not insert more than one wire into
each terminal (insertion) hole.
Name
Description
Common
Terminal Block
Five types of 8/12/16/20/40 pins are available.
End Cover
This part is required to prevent electrical shock.
Attached on the end surface (metal exposure part) of the
last terminal block.
End Brackets
This part is available as an accessory. End blocks must be
attached on the both ends to hold terminal block in place.
Nameplate or
Labels
This part is available as an accessory.
Select the most suitable one for your needs.
You can also use commercially available nameplates that
are 9.5 mm wide and 0.5 mm thick.
Short Bars
All pins are shorted.
Indicator
Turns in green when the connection is completed.
Common Terminal Block
End Cover
Order separately
Nameplate or Labels
Short Bars
Indicator
(Wire insertion state
indication part)
End Brackets